0
The RB-TemTV-L Infrared Camera for Rotary Kiln is equipped with a probe that can be directly inserted into the heating furnace, enabling continuous real-time monitoring of the furnace's heated workpiece status and precise temperature measurement from the centralised control room.
The RB-TemTV-L Infrared Camera for Rotary Kiln is equipped with a probe that can be directly inserted into the heating furnace, enabling continuous real-time monitoring of the furnace's heated workpiece status and precise temperature measurement from the centralised control room. Users can adjust combustion parameters based on temperature data to ensure that the workpiece reaches the rated temperature while optimising energy efficiency.The system supports simultaneous temperature monitoring of multiple points or zones, including furnace walls and workpieces, over a wide area. Users can define temperature measurement zones and set hazardous temperature thresholds. If the measured temperature exceeds the threshold, the system triggers alarms through visual and video notifications and archives temperature data for further analysis.The high-temperature probes feature air and water cooling mechanisms, ensuring stable and maintenance-free operation in furnaces with temperatures up to 1800°C.
Product Features
■ A high-precision short-wave infrared thermographic temperature measurement sensor specifically designed for high-temperature furnace applications.
■ Wide field of view 85°.
■ Can be inserted into the furnace to shoot in harsh high temperature environment.
■ Camera can be automatically withdrawn from the furnace in case of over temperature, low air pressure, power failure,etc.
■ Induction wavelength：8μm-14μm.
■ Temperature range:150℃~1800℃.
■ Temperature measurement accuracy: 1%
■ Resolution: 640*480.
Technical Specification
| Camera shot | |
| Lens length | 920mm or 787mm |
| Viewing angle | Direct view 0º |
| Angular field of view | HxVxD 65°, 56°, 85° |
| Induction wavelength | 8μm-14μm. |
| Focus and Iris | Manually adjustable |
| Conditions of use | |
| Heat-resistant | Up to 2000°C |
| Cooling system | Compressed air and water cooling |
| Transmission device | Pneumatic Rodless Cylinder |
| Power supply | 220VAC/50Hz |
| Compressed air requirements | |
| Air pressure | ≧0.5MPa |
| Air flow rate | ≧30m³/h |
| Air temperature | <35°C |
| Air mass | Clean air free of dust, oil and water |
| Cooling water requirements | |
| Water inlet pressure | ≧0.3MPa |
| Water flow rate | ≧1m³ /h |
| Camera Specifications | |
| Induction wavelength：8μm-14μm. | |
| Resolution: 640*480. | |
| 30fps, can output real-time image. | |
| Support wide dynamic range up to 120dB, suitable for backlight environment monitoring. | |
Real-time display of temperature and history curve. | |
| Support 1000M adaptive network interface. | |
| TCP/IP digital output. | |
| Power Supply | DC12V±10%/ DC12V±10% / PoE |
| Operating Temperature | -30℃~60℃ |
| Power Consumption | <30W |
Rendering
Furnace camera system with retraction device
The pneumatic retraction mechanism consists of a cylinder, guide rail, and mounting bracket, designed for precise and reliable operation. The retraction control system uses relay control to monitor critical conditions, such as low cooling gas pressure, over-temperature, or power failure. Under these circumstances, the mechanism automatically retracts from the furnace chamber, effectively safeguarding the infrared camera system from potential damage.
Video camera system structure diagram
On-site picture
